7/8″ ODS Brass Ball Valve, Access Fitting

$49.99 $49.99

25 in stock

  Ask a Question

Description

Share with:


Superior HVACR Products –
Part number: 587WAS-14ST

Description
Brass Ball Valve – WA / WAS Series

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon® ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal – even in extremely unfavorable conditions such as compressor burnout – a Superior exclusive!

WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions – another Superior exclusive. Full open to full close with 1⁄4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses.

Teflon gaskets to provide a secondary seal – a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow – even during evacuation of the system. Full flow ports in all sizes 3⁄8″ through 31⁄8″. These ball valves are non-directional flow valves and may be installed in any position.
Full refrigeration service temperature range of -40° F to +325° F (-40° C to +149° C).
Design working pressure: 700 PSIG.
UL® and cUL Listed, File No. SA3462 (N), except for metric sizes and oxygen.
WAS Series includes access fitting, strategically located on tube extension.
No synthetic O-ring seals. Double seal protection provides a Superior stem design.
Polished brass or carbon steel ball.
Forged brass body and seal cap.
Seal cap design permits valve operation without removal of seal cap.
For use with CO2, CFC, HFC and HCFC refrigerants listed in CAN/CSA B52 and ANSI/ASHRAE 15 Section 9.2.

Features and Specification
Weight
1.100000
Connection Size
7/8″ ODS
Connection Type
Sweat or Braze
Composition
Brass
Cubic Measurement
0.015000
Brand
Superior
Valve Type
Ball Valve
Height
2.800000
Length
6.600000
Width
1.400000
Ball Port Diameter
3/4″
Body Material
Brass
CUL Listed
Yes
Maximum Pressure (PSI)
800 PSIG
UOM
EA
Operating Temperature Range
-40°F to 325°F
Size
7/8″
UL Listed
Yes
UPC
685768412946
Prop 65
Yes

Refund Policy

All sales are final unless explicitly implied and stated otherwise by user selling through our platform.

We take no part in the refund and exchange of equipment and material sold here unless product model number, serial number are not identified in sales agreement executed.    

Equipment Surplus List LLC will be held completely free of any liabilities therein.   

Cancellation / Return / Exchange Policy

Equipment Surplus List sells heating, ventilation, air conditioning, and refrigeration equipment with customer service and client satisfaction regarded as our number one priority.

We highly encourage your questions to be communicated to Equipment Surplus List or to its third party vendors about the specifics of what you are buying before making a final buying decision.

The following outlines the specifics of our return and refund policy.

Equipment Surplus List only accepts returns for items that have been badly misrepresented, shipped incorrectly or damaged by the shipper.

Returns and exchanges will only be considered within 14 days of sale. The fourteen days will begin once the product has been received by the buyer (verified by the shipper).

All orders subject to 25% restocking fee. We do not offer a refunds for shipping unless product was very poorly misrepresented (stated wrong voltage, incorrect model number, wrong manufacturer) or shipped incorrectly (meaning we were given correct information but a shipping mistake was made on our end).

If product or equipment is determined to be returnable, BUYER is responsible for all shipping fees associated with getting product back to us including insurance.

The correct shipping insurance for product must be purchased in order for damages in return transit to be covered if damage occurs. Any expense related to damages to products that occur in return transit not covered by carrier’s insurance will be the responsibility of purchaser.

Shipping damage policy:

Damages of products or equipment must be reported to us within 3 days of the delivery date. This is to insure that we can file a claim with the carrier when applicable.

Please send an email to support@equipmentsurpluslist.com describing the damage with pictures of the product and the packaging for our consideration.

NO returns, refunds, and exchanges will be accepted if item was incorrectly ordered. All MPN (model numbers), dimensions, specs, and weights stated in description of equipment or product should be thoroughly reviewed by buyer before making buying decision.

No warranty implied, stated, or given for any equipment sold.

IMPORTANT DISCLAIMER:

Equipment Surplus List will not be liable for any damage to properties or bodily injury or harm incurred by equipment sold and installed by purchasing party.

Equipment Surplus List does not encourage the installation of any equipment or materials by unlicensed individuals or parties.

REGARDING OUR VENDORS

Please be aware that some items listed for sale on our platform are being offered through a third party vendor or contractor. All sales transacted with sellers are therefore subject to the terms and policies expressly written and stated by each selling entity.

We do our best to encourage professional communication and maintain high selling standards. Return and refund policies may differ amongst all sellers represented here as a whole. Please take the time to read and review each individual seller’s policies.

General Inquiries

There are no inquiries yet.